Residential hybrid storage
Coordinate rooftop PV, battery and grid power for daytime self-consumption and selected backup circuits.
Explore solution →Project-matched hybrid inverters, LiFePO4 batteries and commercial storage solutions for Malaysian distributors, EPC partners and installers.
Final configuration requires project-specific technical confirmationMalaysia's Sustainable Energy Development Authority describes rooftop solar self-consumption and export under its Net Energy Metering framework, while the Energy Commission publishes technical guidance for compliant solar PV connections. Battery storage projects should be designed separately around the operating objective, essential loads, site conditions and the current requirements of the relevant utility and authority.
Coordinate rooftop PV, battery and grid power for daytime self-consumption and selected backup circuits.
Explore solution →Three-phase solar and storage configurations for offices, retail, hospitality, workshops and refrigeration loads.
Explore solution →Off-grid inverter/chargers and scalable LiFePO4 storage for farms, islands and facilities with constrained utility supply.
Explore solution →Define whether the priority is self-consumption, essential-load backup, generator reduction, peak management or a combination.
Confirm single- or three-phase supply, nominal voltage and frequency, maximum demand and critical-load circuits.
Provide roof or array information, indoor or protected battery location, ventilation, humidity and ambient temperature.
Confirm the current utility application route, approved equipment requirements, required certificates and installer responsibilities.
Potentially, but the selected inverter, protection, metering and installation must satisfy the current requirements of the relevant authority and distribution licensee. Confirm compliance before ordering.
Yes, when the selected hybrid architecture supports backup operation and the essential circuits, transfer arrangement, battery power and required runtime are designed accordingly.
Yes. Three-phase hybrid and 30-125 kW commercial storage options are available. Final selection requires interval load data, critical loads, site phase and the intended operating mode.
We will match the inverter, LiFePO4 battery and solar array for your technical confirmation.
Request a Proposal →